Use of Fiber Optic Polishing Machines in polishing fiber-optic connectors

The end faces of fiber optic products (cables, connectors, adapters, etc.) are polished by fiber polisher machines so that signal losses can be minimized that take place due to scattering. The connector is an important step in the whole fiber optic polishing process. There is an increase in insertion loss and reflection by bad polished connectors which will ultimately result in malfunction.

Optical performance is highly influenced by polishing the fiber/ferrule end faces of a fiber-optic connector and it is highly susceptible to error. Still, the polishing process is neither difficult nor mysterious. In the final step, fiber is optically prepared with the help of polishing so that it can make sure that the defects and non-uniformities in the end faces of fiber or geometry do not degrade the passage of light across the connector joint.

Within a precision ferrule, a fiber-optic connector has the fiber placed, which is made of ceramic, stainless steel, or polymer. After cleaving, polishing removes excess epoxy or fiber stub that is left, it even shapes the ferrule, and also removes the scratches present in the glass. 

There are various features that you need to consider while choosing a fiber polishing machine there. These consist of changeable holders, a timer, adjustable pressure, and the ability to request custom specifications.

Polishing machines are available with adjustable pressure. This is necessary because of the loading pressure and the hardness of the polishing surface the fiber connector's finished end-face geometry is generated. The polishing pressure should be adjustable with clearly marked divisions of measurement so that it can optimize the connector end face. The connector is an important step in the whole fiber optic polishing process.

In the polishing machine, there is a must requirement of changeable holders so that one machine can be used for many connector types. 

During connector and fiber manufacture the first two factors are determined and during connector termination, they are beyond control. By fiber polishing fixture the last two factors are directly influenced. The end finish is necessary because scratches, fractures, and other imperfections present to prevent the maximum transfer of optical power between the two joining fibers.

Ways By Which Fibre optic splicing can be done

Instead of using optical fiber connectors, it is possible to splice two optical fibers together. fiber splicer can be defined by the fact that between two fibers optic cables it provides a permanent or relatively permanent connection. Few manufacturers offer fiber optic splices that can be disconnected, but for repeated connection and disconnection they are not intended.

The need for fiber optic splices arises on many occasions. One of the most common is when a fiber optic cable that is available for the required run is not sufficiently long. In this case, to make a permanent connection it is possible to splice together two cables.

In two ways fiber optic splices can be undertaken:

Mechanical splices

Fusion splices

When there is a need for the splices to be made quickly and easily there is the use of mechanical splices or fiber cleaner. It is important to strip back the outer protective layer on the fiber optic cable to undertake a mechanical fiber optic splice then clean it and perform a precision cleave or cut. It is necessary to get a very clean cut while performing the cut to the fiber optic cable.

Once cut off the ends of the fibers that are to be spliced are placed into a precision-made sleeve. To maximize the level of light transmission they are accurately aligned and then they are clamped in place.

Mechanical and fusion splices

In different applications, there is the use of the two types of fiber optic splices. For applications where splices need to be made very quickly the mechanical ones are used. For mechanical fiber optic splices few of the sleeves are advertised as allowing connection and disconnection. In this way in applications, a mechanical splice can be used where the splice may be less permanent.

A lower level of loss and a high degree of permanence is offered by fiber stripper. However, they may need the use of expensive fusion splicing equipment. Because of this, they are used more for the long high data rate lines that are installed, and once installed they are unlikely to be changed.

Learn About Types of Fiber Optic Tools Used For Cleaning

If you want to improve transmission and communication, then cleaning your fiber optic cable and fiber stripper regularly is the answer. Cleaning the fiber optic cables is quite essential. In case for the first time you have cleaned your cable or have noticed any problem with your network then below are given information on cleaning materials that you can utilize for cleaning and solving issues in connectivity.

Canned Air and Gel

To clean the surface area beside the connector canned air makes it quite easier. For technicians, it becomes easier to remove the dust particles surrounding the cable before they actually remove it and it also prevents the dust from contaminating the end face area. To reduce losses that occur during splicing gel marks as the perfect tool. At the interface of the matted fibers, Technicians should apply the gel.

Wipes

For fiber optic cables wipes and fiber tool kit are the most popular cleaning tools. The pre-moistened are one-time individually wrapped wipes; it contains fast evaporating isopropanol and from the end faces of the cable it is used to remove oils, dust, and dirt.

You will find that maximum contains 99% isopropyl alcohol which is required for proper cleaning. However, while using liquid alcohol as residual liquid care must be taken as it can cause problems later on. In the case of female multi-fiber connectors, no alcohol should penetrate guide pin holes as during mating this can damage and contaminate the fiber later.

Lint-Free Swabs

In cleaning sleeves, bulkheads, and other recessed areas, lint-free swabs, and fiber cleaner are perfect. Technicians need to do a complete revolution in the same direction that to several times or as needed so that they can use the swabs. It is necessary not to reuse the swab with other connectors as this can result in contamination. When repeat cleaning is necessary use a new one. For the wet cleaning technique, lint-free swabs can also be used. You need to just simply use a single drop of 99% alcohol and clean the end face. To prevent any residue keep in mind to dry the area immediately.

For more information visit us: https://www.sunmafiber.com/

Caring For Your Polishing Fixtures for Optical Fiber Polishing Machines

The most critical step In the process of fiber optic cable assembly is assuring high-quality assemblies for meeting specifications is the polishing process. So it becomes very much necessary to choose the right optical fiber polishing pad and polishing fixtures that meet your requirements.

For your company, the quality of the polishing fixtures (also called polishing plates or jigs) is very much important. Keeping in mind the high cost of production equipment and components, your company will need to maintain these tools so that over the long run it can produce a high volume of products with minimal quality issues.

The necessity of Proper maintenance of polishing fixtures

With high-precision machining equipment, the fiber polishing film for optical fiber polishing machines is built. Over time the fixtures made of steel and aluminum can flex and warp, which will hurt your polishing process and product quality. On the other hand, this wear effect is avoided by polishing fixtures that are made of hardened stainless steel. However, the alloy hardened stainless steel contains more iron that will ultimately result in an increased risk of rusting. This is a major reason why proper maintenance is so critical.

Along with the above, with a plastic latch or clamp the most common fiber optic connectors are locked onto the polishing fixture, which over time can wear if not properly cleaned. Proper locking can be prevented by poor cleaning techniques. This can have a major impact on the polishing machine’s functionality and product quality.

Polishing fixtures are quite expensive and this is a reason why proper maintenance is so important. You can use your fiber polishing liquid for a long time with daily maintenance and with no variation in the quality level of your fiber optic cable assemblies.

To monitor the quality of your polishing fixture, monitoring the end-face geometries of polished ferrules is an excellent way.

For example, Changes in Radius can tell you possible poor latching or a worn clamping mechanism. In case this situation occurs and there is no change in the polishing process

then it is the right time to replace the plastic latch or the polishing fixture.

Original source: https://sunmafiber.tumblr.com/

Steps of Fusion Splicing Explained Here

Permanently joining two fibers together is the process of Fiber splicing with a fiber splicer. These are designed for easy reconfiguration on patch panels or cross-connect, unlike fiber connectors.

 Fusion splicing is one type of splicing. By an electric arc, two fibers are welded (fused) together in fusion splicing. The most widely used method of splicing is Fusion splicing as it provides for virtually no back reflection and the lowest insertion loss. Between two fibers, Fusion splicing provides the most reliable joint. By an automatic machine called fusion splicer, Fusion splicing is done.

Fusion splicer

As we said above, used to weld (fuse) two optical fibers together, the fusion splicer is the machine. This process is known as fusion splicing. On the fusion splicer, the fiber ends are placed in alignment fixtures after being prepared and cleaved. The fiber ends are heated with electrodes at the press of a button. They are then brought together and fused.

You need to either set the splicing parameters yourself or choose factory-recommended settings as Fusion splicers are automatic machines.  To fusion splicing, there are five basic steps with a splicing machine.

• The sleeve for fusion splice protection must be used.
• The fiber is then stripped with a fiber stripper. Down to the 125um bare fiber, Strip back all-fiber coatings. With 99% isopropyl alcohol, clean the bare fiber.
• The fiber is cleaved. With a high precision cleaver, the fiber needs to be cleaved. With a recommended cleaver, most splicing machines come. On the quality of cleave, the quality of the splice is based.
• In the fusion splicer, Put the fibers into the fiber holders. To start the fusion splicing, Press the start button.
• To protect the splicing joint, the protection sleeve is Heat shrinked

Some tips for splicing technicians and contractors

• Maintain a clean splice environment and clean equipment, being especially wary of dusty and windy conditions.
• For maintenance and setup of all splice equipment, follow the applicable equipment manufacturer’s guidelines. Maintenance requirements are needed by all fusion splicers which in the operating manual should be described. They need occasional replacement and electrode alignment apart from cleaning regularly. For servicing, the manufacturer’s requirements must be followed.
• With the total link power budget in mind, Splice loss specifications should be set and the average splice loss must determine it.
• As an initial no-go or go evaluation of the splice, the estimated splice loss reading of the fusion splicer must be used.

Are You Curious To Know About Curing Oven? Read This

Curing Oven

Designed to increase the strength and lasting of the material, and industrial fiber curing oven is a thermal processing equipment piece, which accelerates a chemical reaction. In simple words by elevating the temperature of sample material to within or above a specific limit, a curing oven achieves this standard.

In engineering raw materials such as thermoset polymers, rubber, and synthetic adhesives, curing ovens are commonly used. In enhancing the properties of construction materials in situ, the process of chemical curing is used, but to encourage thermosetting in situ over extended periods this application requires highly specialized curing apparatuses.

Polymerization: a common curing oven application

Polymerization is referred to as the formation of complex polymer chains from small molecule monomers across a broad range of chemical species and functional groups. For some of the most industrially consumed plastics worldwide, including polypropylene, polyvinyl chloride, and polyethylene you will find this particular reaction being responsible.

The formation of high-strength bonds between monomers is encouraged by curing ovens and it synthetically grows these materials in high-temperature environments.

Through industrial curing, fiber polishing epoxy resins can also be formed and it occurs by heating liquidized polyether to create a network of long-chain molecules. In construction and engineering, with countless applications as an intermediary product, these products are ubiquitous.

To improve the strength and durability of material industrial curing ovens are used and it is achieved by thermal processing specialists by applying heat to accelerate a desirable chemical reaction. In simple words, by raising the temperature of sample material to within or above a specific limit a curing oven achieves this bar. This is very much enough to increase the physiochemical linkages that bind the material together and hence improve the mechanical characteristics of the product.

To facilitate the required reaction in the curing oven it is usual for operators to add one or more catalyzing agents. In the above manner curing ovens and fiber polishing film are employed in several raw materials such as synthetic adhesives, thermoset polymers, and rubber employ. Through chemical curing in situ enhancements can be brought, but highly specialized curing apparatuses are needed in this type of curing to ensure proper thermosetting in situ over extended periods.

Benefits Offered by Fiber Optic Cables

Coated with a final outer layer, a cable is a buffer for extra protection from other damaging agents and moisture.

Through two main types of fiber optic cables, fiber curing oven, Fiber optic communication moves on. To transmit signals and in multi-mode cables, Laser lights move through single-mode light-emitting diodes or fiber cables LEDs do this job. As compared to single-mode cables, Multi-mode cables are thicker and heavier. In fiber-optic communication, the basic principle of total internal reflection works to transmit light signals to the place of its destination from its place of origin.

The technology of optical fiber communication comes in handy in inspecting plumbing, sewer lines, medical imaging, and Internet signals, and even in digital television connections apart from telecommunications. The benefits are as below:

Cost-effective: As compared to copper wire, Fibre optic cables and fiber crimping machines are more cost-effective. The customers, as well as service providers, save a lot of money by replacing copper with optical fibers. Another advantage is the higher carrying capacity of optical fibers than copper wire. Great help to the customers is the Transmissions of more signals at a time without much interference.

Less power is used: save a considerable amount of money on power and thus, the signal generators used in optical fiber communication use lesser energy. The computer networks pick them easily as the signals are digital.

Lesser signals degradation: Fibre optic cables over a long-range can retain the signal intensity in comparison to traditional wires. The light signals transmitted through these cables with each other do not interfere and thus you receive signals that are clearer and easier to understand. You can buy fiber polishing fixtures online.

Flexible and lighter: There is a space shortage in many urban places. This limited available space is shared among power wires, sewer lines, and subways. They being lighter can fit in smaller and crowded places. This very character makes them move through every corner quite easily as Flexibility is their gifted benefit.