Learn About Types of Fiber Optic Tools Used For Cleaning

If you want to improve transmission and communication, then cleaning your fiber optic cable and fiber stripper regularly is the answer. Cleaning the fiber optic cables is quite essential. In case for the first time you have cleaned your cable or have noticed any problem with your network then below are given information on cleaning materials that you can utilize for cleaning and solving issues in connectivity.

Canned Air and Gel

To clean the surface area beside the connector canned air makes it quite easier. For technicians, it becomes easier to remove the dust particles surrounding the cable before they actually remove it and it also prevents the dust from contaminating the end face area. To reduce losses that occur during splicing gel marks as the perfect tool. At the interface of the matted fibers, Technicians should apply the gel.

Wipes

For fiber optic cables wipes and fiber tool kit are the most popular cleaning tools. The pre-moistened are one-time individually wrapped wipes; it contains fast evaporating isopropanol and from the end faces of the cable it is used to remove oils, dust, and dirt.

You will find that maximum contains 99% isopropyl alcohol which is required for proper cleaning. However, while using liquid alcohol as residual liquid care must be taken as it can cause problems later on. In the case of female multi-fiber connectors, no alcohol should penetrate guide pin holes as during mating this can damage and contaminate the fiber later.

Lint-Free Swabs

In cleaning sleeves, bulkheads, and other recessed areas, lint-free swabs, and fiber cleaner are perfect. Technicians need to do a complete revolution in the same direction that to several times or as needed so that they can use the swabs. It is necessary not to reuse the swab with other connectors as this can result in contamination. When repeat cleaning is necessary use a new one. For the wet cleaning technique, lint-free swabs can also be used. You need to just simply use a single drop of 99% alcohol and clean the end face. To prevent any residue keep in mind to dry the area immediately.

For more information visit us: https://www.sunmafiber.com/