You Must Know These about Proper Crimping Techniques

For crimping, this is correct. To ensure a long-lasting connection, use proper crimping procedures and a Fiber Crimping Machine throughout the fiber termination operation. After all termination processes have been completed, the cable can be tugged without coming loose from the connection. Specify the maximum draw force for each fiber optic cable assembly industry specification, as well as any needs from your customer.

When correctly crimped, the cable assembly is strong enough to resist a decent amount of pulling throughout the final phases of manufacture and installation. Even after installation, the cable assembly may have to tolerate some mechanical stresses. A suitable fiber crimping machine ensures that force is applied to the connection rather than the delicate glass fiber.

Crimping, a small but important step in the manufacturing process, typically strengthens the cable assembly and protects the fiber. Proper crimping procedures and Fiber Polishing Machine assist in ensuring that the optical connection is maintained, which has a direct influence on dependability and performance over time.

Advice on Best-Practice Crimping Techniques

The crimping procedure consists of the material to be clamped, the connector body, and a metal crimping sleeve, which is often made of aramid yarns, the cable's strongest element. To optimize your crimping methods, use these suggestions:

To get the optimum crimp and maximum draw force for that assembly, the connection manufacturer specifies the crimp tool for each connector body, die set, crimp sleeve, and crimp force. Using the appropriate tools and components is crucial. Crimped connectors are often textured and rough, which increases the contact surface area. In the overall assembly, such features contribute to the greatest draw force.

Using the incorrect Fiber Crimping Machine might result in a broken cable assembly; the crimp will most likely be too hard or too light. A crimp with too much force might crush the connection. If this structure fails, the glass optical fiber may be destroyed as well. The aramid yarns might pull away if the crimp is too light, reducing the maximum pull power. As a side note, you can utilize the connection manufacturer's suggested fiber curing oven or an automated crimp tool, which provides repeatability and improves process control by reducing operator fatigue.

Follow our Facebook and Twitter for more information about our product.