Whether installing fiber-optic (FO) cable indoors or
outdoors, following a step-by-step process lowers the risk of fiber damage
while assuring fiber performance. As we continue to talk about installing FO
cables, let's break down how to strip and clean both interior and outdoor FO
cables. fiber
stripper is a useful tool needed for this.
Without a doubt, using effective stripping methods in
your fiber optic cable manufacturing process is essential. What occurs if the
fiber is harmed during this manufacturing step? A microscopic nick or scratch
in the optical fiber acts as a ticking time bomb. Eventually, if the connection
is subjected to stress or temperature cycling, this flaw may cause a fracture
to develop. A cable assembly's connection is compromised or lost if a fiber
fractures. It may be necessary for your cable assembly house to repair or
replace connections in the field, which might be quite expensive for your
business. You can buy fiber tool kit online at an
affordable price.
The first thing to keep in mind is that each layer must
typically be stripped separately when multi-layer cables are being stripped for
connecting since they often need to be stripped to various lengths. That is,
the layers of the wire above must be peeled one at a time rather than all at
once. It is important to take precautions to prevent harm to the layers
underlying while removing an outer layer. No matter what kind of stripping
equipment you use, make sure to maintain them correctly to keep the cutting
blades sharp.
If the fiber is not harmed, a wire stripper with the
right settings or a specialized fiber stripper can be used to cut and remove
the cable jacket. Some fiber strippers and fiber splicer are
more practical because they contain grooves for both the jacket and the fiber.
Cutting the aramid fibers requires the use of specialized, ultra-sharp
scissors. They should not be used to cut anything else since doing so will
destroy them and dull the cutting edge.
